Westcott 1.0.4

Complete Control From the Palm of Your Hand

Seamlessly pair your Westcott L60-B COBs and FJ-X Wireless Triggers via Bluetooth®.

Expand Your Possibilities

The StudioLink app allows you to create up to 10 groups when connected to multiple L60-B COBs—allowing users the ability to create several groups with individualized control. The app also expands the FJ Wireless color-coded grouping functionality by increasing the number of groups available from 6 to 16. Connect up to 99 FJ Wireless lights.

Save Your Lighting Setups

The Westcott StudioLink App allows you to create and save up to 99 of your favorite reoccurring lighting scenario settings by saving them as Scenes. This is available in both the FJ and LED sections of the app.

-L60-B COB Controls-

• CCT
• Intensity
• FX
• FX Frequency
• Blackout Mode
• Standby Mode
• Blackout Mode (All Lights)
• Standby Mode (All Lights)

-FJ-X Triggers Controls-

• Modes-
• • TTL
  • Manual
  • Mask
  • Delay
• Sync-
• • High-Speed Sync (HSS)
  • Front Curtain Sync
  • Rear Curtain Sync
  • Freeze
• Functionality-
• • Test Fire
  • Modeling Light (ON/OFF)
  • Audible Beep (ON/OFF)
  • Sleep

• Connecting an L60-B COB

• 1. Ensure that the L60-B is ON.
  2. Open the StudioLink app.
  3. Select the LED Controls icon.
  4. On the L60-B, quick-press the Dim•Bluetooth control knob to turn Bluetooth® on (symbol will appear).
  5. Long-press the DIM•Bluetooth control knob until the Bluetooth® logo appears to blink on the L60-B [now discoverable to the StudioLink app].
  6. Select Add a Light or Group.
  7. Tap the Add a Light option.
  <

• Connecting an FJ-X Trigger

• Enabling Bluetooth®

• FJ-X2m

• * Turn on the FJ-X2m by long-pressing the Power|Menu button.* Press the second and third Menu Selection buttons simultaneously to enter the Settings menu.* Scroll down on the Selection wheel until the Bluetooth® icon is highlighted green.* Press down on the wheel to highlight [OFF], then press down on the wheel once to change the status to [ON].* Press OK to return to the main screen. [Note: The Bluetooth® icon is in the bottom right-hand corner.

• FJ-X3

• * Turn on the FJ-X3 by long pressing the Power button.* Press and hold down the SYNC ∙ MENU button to enter the Settings menu.* Using the Control Pad click the down button until the Bluetooth® icon is highlighted green.* Press down on the center button of the Control Pad to highlight [OFF], then press down on the down button once to change the status to [ON].* Press and hold down SYNC∙MENU button to return to the main screen. [Note: The Bluetooth® icon is in bottom right-hand corner. *NOTE: Powering off FJ-X triggers will turn off Bluetooth® functionality. Repeat steps above to re-enable.

• Connecting FJ-X Triggers to Westcott StudioLink App

• * Ensure that FJ-X is on.* Ensure that FJ light is on.* Open StudioLink app.* Select FJ Controls icon.* When app displays Select a Devices screen, select your FJ-X Trigger from list of available devices.

• IMPORTANT:G Ensure all versions of software and firmware are up-to-date for all connected devices, including cameras, Westcott FJ devices, L60-Bs, mobile devices, and Westcott StudioLink app.